IMG_20180511_220817_418-min - Little Acorn Furniture

commission

Our Courses

Family “greenwood” experience
Alasdair will take you through the basic principles of Green Woodworking and provide the knowledge, tools and materials needed to get you using a pole lathe. Turn as many items as you like using a variety of local hard woods and unlock the full potential of this ancient craft.
Introduction to pole lathing
During this one or two day course, you will get to practice the principles of green woodworking: cleaving and shaping the wood using side axe and draw knife before turning on a pole lathe to produce a range of items - as long as it is round!
Simply stools
This two-day course offers you the chance to produce a simple three or four legged stool with hard wood top and turned or draw knifed legs.
From tree to table
This three day course gives you time to produce a table or bench with stretchered legs using more advanced techniques. The addition of stretchers between the legs allows you to make larger items with more refinement.
Table making course
This four-day course gives you time to explore the intricacies of green wood furniture design to produce a dramatic and unique piece of furniture of your own design.
Chair making course
Over this full four day course you will make and assemble a complete chair from local Ash and Beech. Choosing from one of two traditional designs you will be responsible for shaping all components and joining therm using traditional wedged mortice and tenon joints
Make your own shaving horse
In order to make a traditional shaving horse you will need a pole lathe, in order to use a pole lathe a shaving horse is essential. Get around this catch 22 situation by making your very own shaving horse over two days in Alasdair's fully equipped Greenwood workshop.
Handle making and tool restoration
This is a one day course aimed at giving you the basic knowledge and skills required to make a tool handle of any sore from green Ash. Be it an axe, hammer, chisel or spade you can restore personalise and bring back to life any old tool. We will go back to the days when things were done 'proper' and a tool handle could last a lifetime of use.
Cleft hurdle gate making
Discover the ancient art of gate making using authentic traditional tools and techniques. Using the true nature of the wood to ensure both beauty and strength, start with a freshly cut log and explore the entire process of cleaving , shaping and jointing.
One-to-one tuition
Work and learn at your own pace - receive uninterrupted expert tuition in the art of green wood furniture making and have exclusive access to the range of hardwoods available in the workshop.

What our customer’s say…

Thanks to Alastair and Simon for a brilliant three day course. Amazing location, excellent workshop and great teaching. Fantastic experience with traditional tools and my own unique table to take home. Highly recommended.

Andrew Davey

Brilliant course in a lovely place. Alasdair is a great teacher. I'll be going back!

Steve Wills

I completed the ‘build your own custom shaving horse’ in 2 days. A great course, well taught in a low key way with as much or as little help provided as required. I would recommend.

Gordon Murrell

We did a family woodworking day with Alisdair and Simon whilst staying at Clifford Barton. We have three boys aged 9, 13 and 16 and all were involved and engaged with brilliantly throughout the day. We made a small table, starting with splitting an ash trunk, then axing, then using the shaving horse, as well as preparing the top from a piece of rough sawn oak. We also all learned some pole lathing skills. It was a fantastic way to send time together, in good company. We hope to be back!

Rebecca Bird

Had a great time. Alasdair and Simon have a great deal of knowledge and patience. Would highly recommend.

Garth Pearse

Took 5 children along to learn carpentry. They all had an amazing time, each made a sword and a baseball bat (their choice). They did everyhthing from sawing the wood to shaping it. Alisdair was so good with them and made sure they each left with finished items. My son who has ADHD was engaged from the start and cannot wait to go again. The parents also had a go and really enjoyed the day too.

Elaine Russell

Amazing course, shaving horse creation in 2 days! Loved every aspect, pole lathing, drawknife, feathering. Alasdair and Simon make a great team and are great teachers, enthusiastic, passionate, if you want to get busy and start creating with green wood I highly recommend this course. In addition to the imparting the practical skills Alasdair also covers woodland conservation, the science of wood and numerous tips on tools and further reading, very comprehensive, it will get you hooked.

Richard Shire

My family and I recently spent an incredibly happy and gratifying time making a green wood table with Alasdair and his assistant, Simon. I cannot overstate what a special, stimulating and satisfying time it was - working together as a family; learning about the wood, the tools and the processes; and making a table which we will have forever and which will always remind us of that bonding time together. It was genuinely one of the most harmonious and fulfilling things we have ever done as a family and I would highly recommend it to anyone, however inexperienced. I have also never met two more gentle and patient teachers and craftsmen, with two more overdeveloped sets of forearms!

Alice Morgan

Really enjoyed my intro to pole lathing course-was great to enjoy the whole process from log to finished product. Alasdair was incredibly knowledgeable and passionate about his craft and made us feel very welcome.

Matt Hamilton

Special present from my son. A brilliant two day experience. The total weekend was great fun, really interesting and a real experience. Tea to start the day then a root around to find a suitable stool top that we each liked the look of. Then a bit of history behind greenwood working. The recently felled log was then produced which we split in half then into quarters. That was a coat off job even in December. A explanation of the next stage of making a rough leg shape came next and how to use the various hand tools. There's always someone to help or offer advice. Using the various hand tool was fantastic and it was the same kind of tools and same methods used back in history hundreds of years ago. The whole process was really absorbing which meant you where able to focus entirely on the three legged stool you are making or discussing each others plans or components. By the end of the two days we had each produced a three legged stool which we were very happy with. Can't wait to move on to another course with Little Acorn Furniture.

John O'Neill

Leave a Reply Cancel reply